Rhodium is a metal from the platinum group, silver-white in color and extraordinarily hard, and a thin plating of it sits on top of every silver-tone 925 piece we ship. It is there for mechanics and durability as much as for how the piece looks, and it is worth spending an article explaining what the plating actually does, because most buyers do not know that the shine on their silver comes from a coating rather than from the silver itself.
This piece covers what rhodium is, why every silver Loretana piece is finished in it, what changes when the plating eventually wears, how to slow that wear, and what re-plating involves. Every point applies to how a Blue Halo hoop or a Flower Ring behaves under normal daily wear.
What rhodium is, precisely
Rhodium is element 45 on the periodic table, a member of the platinum group along with platinum, palladium, iridium, and ruthenium. It is one of the rarest metals in the earth's crust, mined mainly as a byproduct of platinum extraction in South Africa and Russia. Its market price fluctuates between two and ten times the price of gold per gram, depending on demand from the automotive catalytic converter industry, which consumes the majority of world production.
For jewelry, three properties of rhodium matter. Its color is a bright, cool, neutral white, whiter than silver and whiter than platinum. Its hardness is Mohs 6, more than twice that of 925 silver (Mohs 2.5), which means it resists scratches, dents, and abrasion far better than the underlying silver alloy. And it is completely non-reactive at normal temperatures, so it does not tarnish, oxidize, or corrode in air, water, sweat, or common household chemicals.
All three properties are what the plating gives to the silver piece underneath. The silver is what carries the mechanical function and what earns the hallmark. The rhodium is what protects the silver and what carries the visible shine.
Why every silver Loretana piece is finished in rhodium
The plating is not there for looks. It is there for mechanical reasons, because 925 silver, alone, is not durable enough for a piece worn continuously and worked mechanically the way an interchangeable hoop is worked.
Consider what happens to unplated 925 silver across a year of daily wear. The surface reacts with the sulfur in the air, mostly from cars and industrial emissions, and darkens to a dull grey. The metal at the closure points, which is soft at Mohs 2.5, wears from friction with skin, clothing, and its own opposite face at every opening. The click closure loses tension because the mating surfaces have deformed under repeated pressure. By the end of the second year, the piece looks tarnished from arm's length and the closure has softened noticeably in the hand.
Rhodium plating changes all of that. The plated surface does not tarnish, because rhodium does not react with sulfur. The plated surface resists scratches and denting because Mohs 6 is well above the hardness of anything the wearer encounters in normal life. The friction surfaces at the closure wear at roughly a fifth the rate of unplated silver, which extends the useful life of the mechanism by years rather than months.
This is why every silver interchangeable piece in our line (the Blue Halo silver, the Blue Drop, the Blue Duo, the Flower Ring) is rhodium-plated across its entire surface, including the parts of the mechanism that the wearer will never see. The plating on the inside of the hoop and on the internal mating surfaces of the closure is not decorative. It is where the wear happens, and it is where the plating earns its keep.
Where the plating wears first
We do not publish a single plating thickness for the whole line, because it varies from piece to piece. What holds for every piece: rhodium is a surface finish, and it wears first where the piece rubs most, at the hinge and the closure.
What happens when the plating wears
The plating does eventually wear. This is worth stating clearly, because "rhodium-plated" reads to some buyers as "permanent" and it is not.
On a heavily worn interchangeable hoop, the first place the plating thins is at the closure contact points, where the two faces of the hoop meet during opening and closing. On a ring, it is on the inside of the band where the finger flexes and on the top of the shoulders where the ring rubs against neighboring fingers. On a hoop that lives mostly in one ear position without opening, the plating on the outside of the hoop lasts nearly indefinitely.
The visible signs of wear come in a specific order. First, the shine at the wear point softens slightly, because the surface roughness increases even before the plating fails. Second, the plating develops microscopic pinholes at the contact area, still invisible to the eye but visible at 10x magnification. Third, the pinholes coalesce into visible patches where the silver beneath shows through as a slightly warmer, slightly duller color than the surrounding rhodium. Fourth, the exposed silver tarnishes preferentially, producing a darker patch that grows visibly.
By the time step four is visible from arm's length, a re-plating service becomes worth considering. How soon that happens depends on the piece and on how often it is worn.
Re-plating: what it involves and what it costs
Re-plating removes the worn plating layer (or what remains of it), polishes the silver underneath to a smooth surface, and applies a fresh rhodium layer at the same thickness as the original.
The process takes place in an electroplating bath. The piece is cleaned in an ultrasonic cleaner, immersed in a chemical stripping bath to remove old plating, polished mechanically to prepare the surface, and then immersed in a rhodium bath where an electric current deposits fresh rhodium onto the silver at a controlled rate. Total time is usually two to five business days depending on the queue.
Cost for a standard re-plating of a hoop or ring runs 25 to 45 euros in the Baltic market. This is a real cost, but it is far less than replacing the piece, and it restores the piece to as-shipped condition.
Loretana does not offer a re-plating service. Manufacturing and craftsmanship defects are covered by our 24-month warranty; re-plating after normal wear can be done by a competent local jeweller.
Habits that extend plating life
Every plating wears with use. Four habits slow that wear down.
Remove the piece before physical activity involving the hands or ears. Gardening, DIY work, sports, and cleaning all abrade plating faster than any daily activity. A piece removed for two hours of gardening loses far less plating than a piece worn through the same two hours.
Apply cosmetics, perfume, and hairspray before putting the piece on. The chemicals in these products do not directly damage rhodium, but they build up in the hinge and closure of a hoop, where they accelerate friction wear. Waiting five minutes after applying cosmetics before putting on the piece keeps the mating surfaces clean.
Store the piece dry. Rhodium does not corrode in moisture, but the silver beneath any thin spot in the plating does. A piece put away wet after a shower will develop small tarnish spots where the plating is already thinnest.
Clean gently and rarely. Rhodium is hard, but it is thin. Aggressive polishing with abrasive cloths, silver dip solutions, or ultrasonic cleaners removes plating along with any dirt. A soft microfiber cloth and warm water with a drop of mild soap is the correct routine, applied once a month at most.
Rhodium plating and hypoallergenic performance
One further reason the plating matters: rhodium is completely biologically inert. It does not react with skin, does not release ions, and does not trigger any known metal allergy. The plating creates a physical barrier between the wearer's skin and the underlying silver alloy.
For most wearers this does not matter, because 925 sterling silver from a copper-based alloy (which is what we use) is itself hypoallergenic and meets the EU Nickel Directive limits for skin-contact jewelry. But for wearers with severely reactive skin, the rhodium plating adds a second layer of protection that is meaningful. A rhodium-plated 925 piece is one of the least reactive pieces of jewelry it is possible to wear.
When rhodium plating is the wrong choice
Not every silver piece should be plated. Two cases are worth stating.
Antique or oxidized-finish silver. Some traditional Baltic silver pieces are intentionally darkened (oxidized) to bring out engraved details. Rhodium plating would erase the effect. These pieces need no plating and should not receive it.
Textured silver where the texture is the design. Rhodium plating fills fine detail slightly and can dull very intricate textural work. On smooth, polished, or moderately textured pieces the effect is invisible. On pieces where the texture is the aesthetic center, plating is a compromise.
The Loretana interchangeable line uses smooth polished silver as the base surface, where the plating brightens and protects without hiding any design detail. Every interchangeable piece we carry suits rhodium plating well.
Frequently asked questions
Is rhodium plating permanent?
No. Rhodium plating is hard and durable, but it wears with use. It wears fastest on heavily worn parts like interchangeable hoop closures. Re-plating restores the piece to as-shipped condition.
How can I tell if a silver piece is rhodium-plated?
Most 925 silver pieces sold at fine jewelry prices are plated. The plated surface is slightly cooler and whiter than unplated polished silver, which has a very slight warm tone by comparison. A studio that plates seriously usually says so in the product description.
Does rhodium plating stop silver from tarnishing?
Yes, while the plating is intact. Rhodium does not react with sulfur or moisture, so a fully plated piece will not tarnish. When the plating wears through in specific areas, the exposed silver in those areas will tarnish preferentially.
Can I re-plate a silver piece myself?
No. Rhodium electroplating requires specific chemistry, temperature control, and current management that is not safe or practical outside a professional plating workshop. Home plating kits sold online produce very poor results and can damage the piece.
What if I develop a reaction to a rhodium-plated silver piece?
Rhodium itself does not cause allergic reactions. If skin irritation appears from a rhodium-plated 925 silver piece, the most likely cause is either the plating has worn through in the contact area (exposing the silver alloy) or the piece is not what it was claimed to be. An X-ray fluorescence test at a local jeweler will determine the actual composition.
Every silver piece in the Loretana line is finished in rhodium plating, and every piece is hallmarked by Lietuvos prabavimo rūmai before it ships from Lithuania across the Baltic states.
Recent Articles
Related Products
